Electric chain hoist 10ton

TXK heavy duty series have two suspensions for option, hook suspension and electric trolley are available, the trolley is designed suitable for all commercial beams, I beam or H beam. With four fall chains, the hoist will move up and down stably and safety.

Electric chain hoist 10ton

Shell: Light aluminum alloy shell shall be adopted wich is light but hard and fit for the use in the terrible work environment with a high heat dissipation rate and all tightness design.
Inverse phase sequence protecting device:It is the special electrical installation which control the circuit not to work in case of wiring error in the power supply.
Limit switch: The Iimit switch device is installed where the weight is lifted on and off to make the motor to stop automatically so as to prohibit the chains from exceeding for safety.
24V/36V decice: It is used to prohibit the emergencies from occurring in case of the leakage in the switch.
Side magnetic braking device: This device shall realize the instant brake in case of the power dump.
Chain bag: It shall be light, handsome and durable.
Chain: The chain shall adopt the imported FEC80 ultra heat-treatable Alloy steel chain.

Techiacal Parameters
Model SSDHL
  10-04S 10-04D
Capacity (t) 10t
Lifting speed (m/min) 2.7 2.9/0.9
Motor power (Kw) 3.0×2 3.0×2/1.0×2
Rotation speed (r/min) 1440 2880/960
Insulation grade F grade
Power supply 3 phase, 200V-690V, 50/60Hz
Control voltage 24V / 36V /48V
No.of chain 4 4
Spec.of load chain Φ11.2
Net weight 300 380
Hoist with the hook
Size Specification
Model H A B D E
10-04S 1400 630 315 890 445
10-04D 1400 670 388 890 445
Hoist with Electric Trolley
Size Specification
Model H A B D E
10-04S 1190 630 315 890 445
10-04D 1190 670 388 890 445
© Jiali Hoisting Machinery Manufacturing Co., Ltd. ,